In Phase IPA7001D 1Ω Stable 7000W Monoblock Subwoofer Amplifier

The New InPhase IPA range of amplifiers from InPhase is possibly one of the best car amplifiers available today. Car amplifiers are the heart of a system and need be of the best quality available for your budget.

All In Phase IPA car amplifiers are hand assembled and go through 35 different check points to ensure you get the best possible car amplifier today. With 1 ohm stable designs, trimode capability and clever protection circuits, these hand-built powerhouses will take anything you throw at them. Massive heat sinks with a high surface area to volume ratios and cast end caps to hide the wiring connections and keep things controlled – helped by forced air cooling on the real bass monsters.

In Phase IPA 7001D
Power source 14.4V DC (10V to 16V)
Grounding system Negative type
Current consumption 85A (at continuous power : 4Ω)
155A (at continuous power : 2Ω)
316A (at continuous power : 1Ω)
Average current consumption 1.8A (4Ω for one channel)
2.0A (2Ω for one channel.)
2.3A (1Ω for one channel.)
Fuse N/A
Dimensions (W x H x D )250mm x 55.5mm x 580mm
Weight 6.2kg (13.7bs excluding cables)
Maximum power output 2000W x 1 (4Ω)
3800W x 1 (2Ω)
7000W x 1 (1Ω)
Continuous power output 1000W x 1 (at 14.4V. 4Ω 20Hz to 240Hz.<1% THD)
1900W x 4 (at 14.4V. 2Ω 20Hz to 240Hz.<1% THD)
3500W x 2 (at 14.4V. 1Ω 20Hz to 240Hz.<1% THD)
Load impedance 4Ω (1Ω to 8Ω allowable)
Frequency response 10Hz to 250Hz (+0dB.-3dB
Signal noise ratio 100dB (IHF-A network)
Low pass filter: cut off frequency50Hz to 250Hz
cut off slope-24dB/oct
High pass filter cut off frequency 10Hz to 50Hz
cut off slope-24dB/oct
Bass control: Frequency 50Hz
Level 0dB to 12d
Gain control 200mV to 6V
Maximum input level / impedance6V / 22kΩ
Power output 1000W RMS x 1 Channel (at 14.4V 4Ω 20Hz to 240Hz and <1% THD+N)
1900W RMS x 1 Channel (at 14.4V 2Ω 20Hz to 240Hz and <1% THD+N)
3500W RMS x 1 Channel (at 14.4V 1Ω 20Hz to 240Hz and <1% THD+N)S/N ratio75dBA (refrence : 1W into 4Ω)